HP Insight Management WBEM Providers 2.8 for Linux on HP ProLiant and Integrity Servers

HP Insight Management WBEM System Memory Provider 413
Property Name Property Implementation
RedundancyStatus
Represents the current memory redundancy status as follows:
2 (Fully Redundant)
System is operating properly in the Advanced Memory Protection mode given
in the TargetConfiguration property.
3 (Degraded Redundancy)
Degraded Redundancy can occur in either of the following conditions:
• System is not operating in the TargetConfiguration mode (the
CurrentConfiguration mode does not match the
TargetConfiguration mode).
• System is operating in the TargetConfiguration mode but
memory module(s) have correctable errors exceeding the condition for
pre-failure warranty.
HP_MemoryRedundancySet
OperatingSpeed
The current operating speed of the Advanced Memory Protection subsystem in
MHz
AvailableMemory
The size of the memory as seen by the operating system in MB
TotalMemory
Total size of memory as seen by the operating system and memory used for
Advanced Memory Protection configurations in MB
CurrentConfiguration
The current operating mode of the Advanced Memory Protection system.
The value in this property corresponds to the value populated in the property
TypeOfSet[0].
CurrentConfiguration is one of the following:
Advanced ECC, when the system is operating in Advanced ECC mode
RAID, when the system is operating in RAID (XOR) mode
Mirrored, when the system is operating in Mirrored mode
Online Spare, when the system is operating in Online Spare mode
Lockstep
when the system is operating in Lockstep mode