HP Insight Management WBEM Providers 2.8 for Linux on HP ProLiant and Integrity Servers

HP Insight Management WBEM System Memory Provider 400
Property Name Property Implementation
BankLabel
String identifying the physically labeled bank where the memory is located.
For examples:
'DIMM 0A' or 'PROC 1 DIMM 0A' or 'Board 1,0A'
This property is conditional; it is populated if the data is available.
SMX_MemoryModule
Spd
An array that contains raw Serial Presence Detect information for the memory
module. Each array element contains a byte of the Spd.
This property is conditional; it is populated if the data is available.
17-2-3-1 Properties for Memory Module Status
Condition
OperationalStatus[0]
OperationalStatus[1]
StatusDescriptions[0
]
StatusDescriptions[1]
Memory module status is
unknown
0
(Unknown)
<not populated>
Unknown
<not populated>
Memory module is operating
properly
2
(OK)
<not populated>
OK
<not populated>
Memory module is present
but is not currently used by
the operating system
2
(OK)
15
(Dormant)
OK
Memory module status: Memory present
but not in use
Memory module has
correctable errors exceeding
the condition for pre-failure
warranty
3
(Degraded)
5
(Predictive Failure)
Degraded
Memory module status: Correctable
error threshold for pre-failure
warranty has been exceeded
17-2-4 SMX_MemoryBoard Class
The SMX_MemoryBoard class represents a physical memory board on HP servers. There is an instance of
this class for each memory module present in the system; empty memory module sockets are not
instantiated.
The following table lists the properties implemented.