HP Insight Management WBEM Providers 2.8 for Linux on HP ProLiant and Integrity Servers

HP Insight Management WBEM System Temperature Sensor Provider 235
Property Name Property Implementation
EnabledDefault
2
(Enabled)
EnabledState
5
(Not Applicable)
RequestedState
12
(Not Applicable)
CIM_Sensor
SensorType
2
(Temperature)
CurrentState
Normal – if OperationalStatus[0] is 2 (OK);
Critical
– if
OperationalStatus[0]
is
6
(Error);
PossibleStates
Array can contain any of the following values:
PossibleStates[0] = Normal;
PossibleStates[1]
=
Critical
;
CIM_NumericSensor
CurrentReading
Current reading of temperature sensor
BaseUnits
2
(Degrees C)
RateUnits
0
(None)
UnitModifier
0
SupportedThresholds
SupportedThresholds[0] = 1 (UpperThresholdNotCritical) if
the system will set fans to full speed if the threshold is crossed;
SupportedThresholds[0] = 3 (UpperThresholdCritical) set if
the system will gracefully attempt to shutdown the system if the threshold is
crossed;
SupportedThresholds[0] = 5 (UpperThresholdFatal
) if the system
will immediately power down the system if the threshold is crossed.
SettableThresholds
empty
UpperThresholdNonCritical
Contains the threshold temperature that CurrentReading must exceed to
be in a non-critical state. This is only set if the system will set fans to full
speed if the threshold is crossed.
UpperThresholdCritical
Contains the threshold temperature that CurrentReading must exceed to
be in a critical state. This is only set if the system will gracefully attempt to
shutdown the system if the threshold is crossed.
UpperThresholdFatal
Contains the threshold temperature that CurrentReading must exceed to
be fatal. This is only set if the system will immediately power down the