HP Insight Management WBEM Providers 2.8 for Linux on HP ProLiant and Integrity Servers

HP Insight Management WBEM Management Processor Lite Provider 180
Property Name Property Implementation
OperationalStatus
Enumerators indicating the Management Processor operational status (refer to
OperationalStatus mapping table in HP Management Processor Lite Profile
for specific descriptions of when each value is populated).
OperationalStatus[0] contains MP operational status:
0 (Unknown), when NICCondition=0
2 (OK), normal operation
3 (Degraded), when NICCondition=5
6 (Error), when NICCondition=6 or MP software interface fails
OperationalStatus[1] contains NIC status (when MP is enabled):
0 (Unknown), when NICCondition=0 or MP software interface fails
2 (OK), normal operation
3 (Degraded), when NICCondition=5
6 (Error), when NICCondition=6
10 (Stopped), when NICCondition=3
15 (Dormant), when NICCondition=4
Note:
When a Management Processor is disabled (refer to property EnabledState)
OperationalStatus[0] will always report a status of 2 (OK) so as not to
contribute negatively to overall system status. An MP is disabled only if the user
has manually disabled it via the MP’s RBSU settings; this is seen as a normal
condition. In this scenario
OperationalStaus[1]
is not populated.
StatusDescriptions
Descriptive text per OperationalStatus.
StatusDescriptions[0] text per OperationalStatus[0]:
Management Processor Status: Unknown
Management Processor Status: OK
Management Processor Status: Degraded
Management Processor Status: Error
StatusDescriptions[1] text per OperationalStatus[1]:
Management Processor NIC Status: Unknown
Management Processor NIC Status: OK
Management Processor NIC Status: NIC disconnected
Management Processor NIC Status: NIC failed
Management Processor NIC Status: NIC is disabled
Management Processor NIC Status: Not in use, MP is
utilizing host NIC