HP Insight Management WBEM Providers 2.6 for Windows Server 2003 and Windows Server 2008 Data Sheet

Table 7-4 Class: HP_MemoryModule
Property name Property implementation
Manufacturer Name of the organization which produced the memory
module This property is conditional. It is populated if
the data is available.
PartNumber Part number of the memory module This property is
conditional. It is populated if the data is available.
SerialNumber Manufacturer allocated serial number of the memory
module. This property is conditional. It is populated if
the data is available.
CIM_PhysicalComponent
RemovalConditions 3 (Removable when off)
CIM_Chip
CIM_PhysicalMemory
DataWidth Data width of memory module in bits
InterleavePosition Position of memory module in an interleave (if
available)
IsSpeedInMhz The IsSpeedInMHz property is used to indicate if the
Speed property or the MaxMemorySpeed contains the
value of the memory speed. A value of TRUE indicates
that the speed is represented by the MaxMemorySpeed
property. A value of FALSE indicates that the speed is
represented by the Speed property.
Capacity Total capacity of memory module in bytes
TotalWidth Total width of memory module in bits
Speed Speed of memory module in nanoseconds. “Speed “ is
set to “0” if the property “IsSpeedInMhz” = TRUE. “
MaxMemorySpeed The maximum speed (in MHz) of PhysicalMemory
MemoryType Enumerator indicating the type of memory module. See
the MOF file for details.
PositionInRow Position of memory module in a row (if available)
FormFactor Enumerator indicating the form factor of the memory
module. See the MOF file for details.
BankLabel String identifying the physically labeled bank where
the memory is located. This property is conditional. It is
populated if the data is available.
HP_MemoryModule
Spd An array that contains raw Serial Presence Detect
information for the memory module. Each array
element contains a byte of the Spd.
This property is conditional; it is populated if the data
is available.