Insight Management Agents 9.1 User Guide

• Universal Serial Bus Port—This section displays the Universal Serial Bus (USB) ports that have
been enabled for this unit.
Following information is displayed in the USB table:
◦ Port—displays the USB port numbers.
◦ Device Description—displays the device name when the USB device is attached to the
port.
◦ Status—displays the status of the USB device whether it is Present or Absent or N/A.
Default value is displayed as N/A against each available ports on this machine.
• Memory Modules—This section lists detailed information about the memory boards and
modules installed in the system. The following items may be displayed:
◦ Socket Number—displays the socket number for the memory module.
◦ Type—displays the following values depending on the type of memory module selected.
◦ Not installed
◦ Board—The memory module is permanently mounted (not modular) on a system board
or memory expansion board.
◦ Single width module
◦ Double width module
◦ SIMM (Single Inline Memory Module)
◦ PCMCIA (Personal Computer Memory Card International Association technology memory
module)
◦ Compaq/HP specific memory module
◦ DIMM (Dual Inline Memory Module)
◦ Size—Displays the size of the memory module.
◦ Speed—Displays the speed of the memory module.
◦ Technology—Displays the possible values for the memory module technology, including:
– FPM (Fast-Page Mode)
– EDO (Extended Data Out)
– BEDO (Burst Extended Data Out)
– Synch DRAM (Synchronous DRAM)
– Unknown
System Resources
• This section lists the resources in use by the device or client workstation in the following order:
• IRQ Numbers—The Interrupt Request number displays, followed by the slot number of the
board that is using this interrupt.
• Port Address—The port address range displays, followed by the slot number of the board that
is using this I/O port range.
Sub-system Classification 137