HP Insight Management Agents 9.1 Installation Guide

• Enable SNMP Sets—Enables a management console to modify a limited number of
hardware-related parameters. The Insight MIBs define the monitored items that can be modified
by the management console. If this system is a UPS group member, mark this item to enable
shutdown when commercial power fails.
• Enable Remote Reboot—Enables a remote management console to reboot the system. Select
this option if you want to give a remote machine permission to reboot the system.
• Enable the Application Exception Trap—Enables a managed system to send an SNMP trap
and log a Windows® event when an application generates an exception. Afterwards, the
default system exception handler is called to handle the exception. The trap and Windows®
event contain a detailed description of the process, causing the exception. If this feature is
disabled, no trap or event is generated after an application exception. However, the default
debugger is invoked to manage the exception.
NOTE: To view the exception traps in HP Systems Insight Manager, set the SNMP trap
destination to the address of your management console.
• Disable Telnet Detection—Prevents detection of telnet. In doing so, the Server Agents report
that telnet is not available and that the remote console feature of HP Systems Insight Manager
is disabled for this device.
• Disable Rack Infrastructure Traps—Prevents the rack infrastructure SNMP alerts.
• Send Test Trap—Enables a test SNMP trap to be sent to the management console. This is a
useful feature to test the setup of the Insight Management Agents for Servers and SNMP.
• Clear all Thresholds—Enables you to clear all defined thresholds for the device on which the
Management Agent for Servers is running.
Storage tab screen
The Storage tab enables you to disable various storage agent monitoring and features:
Figure 2 Storage tab screen
• To disable Fibre Array Tape Support, click the checkbox.
• To disable Smart Array Tape Support, check the checkbox.
• To disable SAS Agent Tape Support, check the checkbox.
• To disable Smart Array Performance Monitoring, check the checkbox.
Configuring the SNMP Agents 9