HP Insight Management Agents 9.0 Installation Guide

5. After HP Smart Update Manager appears, set the location of the updates, and then click Start
Inventory.
6. Select Local Host, and then click Next.
7. Select the server OS (Windows Server® 2003, Windows Server® 2008, x86, or x64), and
then click OK.
8. Click Install.
Configuring the SNMP Agents
To configure the SNMP Agents, click the HP Management Agents icon from the Windows® Control
Panel.
IMPORTANT: You must have administrator rights to access the Insight Management Agents for
Servers for Windows® Control Panel.
NOTE: The server might not have all of the tabs described.
Services tab screen
The Services tab enables you to activate or deactivate Management Agents. Agents can be added
or removed by highlighting the agent and clicking the appropriate button.
Storage tab screen
The Storage tab enables you to disable Fibre Agent tape support:
Figure 1 Storage tab screen
• To disable Fibre Array Tape Support, click the checkbox.
• To enable Smart Array Tape Support, clear the checkbox.
• To disable SAS Agent Tape Support, clear the checkbox.
SNMP Settings tab screen
The SNMP Settings tab enables you to do the following:
8 Installation and configuration instructions for Microsoft Windows