HP Insight Management Agents 9.0 Installation Guide

4. Follow the onscreen instructions, pressing the F1 key for online help, if needed.
5. After the installation is complete, reboot the system to enable the Insight Management Agents
for Servers for NetWare. These agents automatically start each time you reset the system.
Disabling web-enabled server agent from a NetWare server
If you chose to enable Web-based Management when you installed the Insight Management Agents
for Servers for NetWare and would like to disable it later, do the following from the NetWare
server console:
1. Load CPQAGIN.
2. Select the Configure Existing NetWare Agents option.
3. Select the line that specifies the load of CPQWEBAG and select No.
4. Save changes and exit CPQAGIN.
This procedure prevents the web-enabled Server Agent from loading.
Installing HP Power Management
HP Power Manager is a set of sophisticated UPS software management tools that come with HP
UPS systems. It provides comprehensive configuration and management of UPS systems. Power
Manager comes with two main components: server and console. For complete information on
installation and configuration of the Power Manager components, see the HP Power Manager
documentation.
Server component
The Power Manager server component is installed from the Management CD. Power Manager is
backward compatible with Insight Management Agents for Servers. Existing Insight Manager
consoles see the same data with Power Manager as with Insight Management Agents for Servers.
IMPORTANT: Power Manager requires Insight Server Management Agents v3.30 or later. You
must install Power Manager software after installing Insight Management Agents for Servers
software.
Console component
The console component of Power Manager is an addition to Insight Manager. Insight Manager
must be installed before installing the Power Manager software. When viewing UPS information
on servers with the Power Manager server component installed, the Power Manager screen is
displayed. When viewing UPS information on servers without the Power Manager server component,
the traditional UPS screen is displayed.
Installing client management support
Client management support can be performed either by Windows NT® domain controllers or
NetWare servers. To successfully install this support, Insight Management Agents for Servers must
already be installed on all of the client machines you intend to manage. For more detailed
information on specific features, see the online Intelligent Manageability Installation and
Configuration Guide (IMINST.HLP) and the online Intelligent Manageability Guide
(INTMGT3.HLP).
When a client logs in to a server, the login script executes the program CPQCLNT.EXE. This
program registers the client with the server and enables you to manage it using Insight Manager.
You can register the client in one of two ways:
• With a server designated in the file CPQCLNT.INI
• With a designated server
16 Installation instructions for NetWare