HP Insight Management Agents 9.0 Installation Guide

Installing or upgrading HP Insight Management Agents for servers
IMPORTANT: The version of Insight Manager installed on the management console must be
identical to or later than the version of Insight Management Agents for Servers you are installing
on your systems.
IMPORTANT: Read the installation instructions completely before installing the software.
IMPORTANT: You can download newer versions of Insight Manager and Insight Management
Agents for Servers from the HP management website at http://www.hp.com/servers/manage.
After accepting the click-wrap license agreement, you can install the HP Insight Management Agents
for Servers on additional devices. Insight Manager and Insight Management Agents for Servers
can be used on any number of networked clients and servers. You can also obtain newer versions
through a SmartStart subscription.
If you have already installed the Insight Management Agents for Servers for NetWare using
SmartStart, go to the “Setting up SNMP system description and trap destinations” (page 18) section.
Installing from the Management CD
NOTE: You can also install the Insight Management Agents from the ProLiant Support Pack for
Novell NetWare, which is available with SmartStart or downloadable from http://www.hp.com/
support/files. For detailed installation information, see the ProLiant Support Pack for Novell NetWare
Help file (CPQCSP.TXT).
Read this installation procedure completely before installing the software. The installation varies,
depending on whether you are installing all four of the Insight Management Agents for Servers
components, or updating only specific components.
To install the Server Agents for NetWare from the Management CD:
1. Insert the Management CD into the CD-ROM drive.
2. Mount the CD mounted as a NetWare volume.
3. Install the Insight Management Agents using either of the following processes:
• To install all Insight Management Agents for Servers components, type the following at
the NetWare system console:
LOAD [NetWare VOL]:\AGENTS\NETWARE\ENG\ COMPAQ\CPQAGIN
• The installation utility, CPQAGIN.NLM, installs and configures the Insight Management
Agents for Servers for NetWare.
• To install or update specific Insight Management Agents for Servers components, choose
from the following entries made at the NetWare system console.
◦ To update only the Insight Foundation Agents, enter the following command:
LOAD [NetWare VOL]:\AGENTS\NETWARE\ENG\
COMPAQ\CQMGHOST\CPQAGIN
◦ To update only the Insight Server Agents, enter the following command:
LOAD [NetWare VOL]:\AGENTS\NETWARE\ENG\ COMPAQ\
CQMGSERV\CPQAGIN
◦ To update only the Insight Storage Agents, enter the following command:
LOAD [NetWare VOL]:\AGENTS\NETWARE\ENG\ COMPAQ\
CQMGSTOR\CPQAGIN
◦ To update only the Insight NIC Agents, enter the following command:
LOAD [NetWare VOL]:\AGENTS\NETWARE\ENG\ COMPAQ\
CQMGNICS\CPQAGIN
Installing or upgrading HP Insight Management Agents for servers 15