HP Insight Management Agents 9.0 Installation Guide

Command line examples
The following table lists examples of command line input for single component installation.
NOTE: Although lowercase letters are used in these examples, either uppercase or lowercase
letters can be used.
Table 3 Examples of single component installations
ResultCommand line input
This command line starts installation of the CP002575.EXE
component.
cp002575
This command line installs the CP002575.EXE component
on the target server using the defaults of the component.
The GUI is not displayed.
cp002575 /s
This command line installs the CP002575.EXE component,
forcing the component to install over an existing version,
cp002575 /s /f /r
and enabling the server to reboot automatically if needed.
The GUI is not displayed.
Return codes
When each Smart Component has finished running, the component reports a return code to the
operating system or the calling application.
These return codes are used to determine the status of the component installation. You can also
use return codes in a script to control the execution of the script and to determine any branching
that is required. Table 2-4 summarizes the Smart Component return codes.
Table 4 Return codes
MeaningError level
The Smart Component failed to install. For more
information, see the log file.
0
The Smart Component installed successfully.1
The Smart Component installed successfully, but the system
must be restarted.
2
The installation was not attempted because the required
hardware was not present or the software was current.
3
Configuring the HP Event Notifier
When the system restarts after installing Insight Management Agents for Servers, the Event Notifier
Configuration Wizard runs to complete the installation process.
To initiate the configuration wizard, select Start> Programs> HP Management Agents> Event
Notifier Config. Use the configuration wizard to completely configure the notification service. To
guide you easily through the process, the wizard displays the following three screens:
• Welcome to the HP Event Notifier Configuration Wizard
• Mail (SMTP) Server Information
• Event Recipients Information
12 Installation and configuration instructions for Microsoft Windows