HP Insight Management Agents 8.70 Managing ProLiant Servers with Linux HOW TO

Table 17 Known issues with agents (continued)
DetailsIssue Number
Stop the agent. Change the agent command line argument trap switch to “-t NOT_OK”
in the /opt/hp/hp-snmp-agents/<agent>/etc/<subagent> file. This disables
SNMP traps for this agent only. Restart the stopped agent for the changes to take effect.
Workaround
Disabling remote rebootIssue 14
Stop the server Standard Equipment Agent with the following command:
# /opt/hp/hp-snmp-agents/server/etc/cmastdeqd stop
Edit /opt/hp/hp-snmp-agents/server/etc/cmastdeqd and change the
cmastdeqd agent command line reboot switch to “-r NOT_OK”. This disables SNMP
reboots for this device only. Restart the Standard Equipment Agent for the new changes
to take effect.
Workaround
Peer Agents will not runIssue 15
Check the /var/log/hp-snmp-agents/cma.log file for messages. If it is caused
by not running snmpd, then configure snmpd to start automatically during boot. If you
changed the snmpd.conf files, you must restart snmpd and agents with the following
commands:
# /etc/init.d/snmpd restart
# /etc/init.d/hp-snmp-agents restart
Workaround
36 Troubleshooting