HP Insight Management Agents 8.40 Managing ProLiant Servers with Linux HOW TO Whitepaper

Managing ProLiant Servers with Linux – HOWTO

v8.40

cmahealthd Host daemon to collect temperature, fan, power

supply and memory subsystem status

/opt/hp/hp-snmp-agents/server/etc/cmahealthd

{start|stop|restart|status}

cmastdeqd Host daemon to collect PCI/EISA slot information /opt/hp/hp-snmp-agents/server/etc/cmastdeqd

{start|stop|restart|status}

cmaperfd Daemon to collect performance data for CPU,

Memory, Disk and NIC

/opt/hp/hp-snmp-agents/server/etc/cmaperfd

{start|stop|restart|status}

cmasm2d Agent to collect data from iLO2/iLO/RILOE /opt/hp/hp-snmp-agents/server/etc/cmasm2d

{start|stop|restart|status}

cmarackd Agent to collect data from the ICE infrastructure /opt/hp/hp-snmp-agents/server/etc/cmarackd

{start|stop|restart|status}

Storage Agents

cmaeventd This agent is the storage interface for logging events

to the IML

/opt/hp/hp-snmp-agents/storage/etc/cmaeventd

{start|stop|restart|status}

cmaidad Agent to collect data from cciss/cpqarray drivers /opt/hp/hp-snmp-agents/storage/etc/cmaidad

{start|stop|restart|status}

cmaided Agent to collect data from IDE devices /opt/hp/hp-snmp-agents/storage/etc/cmaided

{start|stop|restart|status}

cmafcad Agent to collect data from the cpqfc driver /opt/hp/hp-snmp-agents/storage/etc/cmafcad

{start|stop|restart|status}

cmascsid Agent to collect data from SCSI storage devices /opt/hp/hp-snmp-agents/storage/etc/cmascsid

{start|stop|restart|status}

cmasasd Agent to collect data from SAS storage devices /opt/hp/hp-snmp-agents/storage/etc/cmasasd

{start|stop|restart|status}

Network Agents

cmanicd Agent to collect data from network interfaces /opt/hp/hp-snmp-agents/nic/etc/cmanicd

{start|stop|restart|status}

Note:

1. All agents support –p, –s and –t as startup parameters

2. Each agent has an associated run level script which is located in /opt/hp/hp-snmp-agents/<agent>/etc/<subagent>.

All important settings such as poll time arguments are contained in these individual scripts.

Table 19: Command line arguments for hp-snmp-agents

Command line argument Description

-p poll_time Specifies the number of seconds to wait between data collection intervals. The minimum

allowed value is 1 second and the default value is 60 seconds.

-s set_state Specifies whether SNMP set commands are allowed for this agent. A set_state of OK

(default) means that SNMP set commands are allowed. A set_state of NOT_OK means that

SNMP set commands are not allowed.