Manualshelf

HP Insight Management Agents 8.40 Managing ProLiant Servers with Linux HOW TO Whitepaper

ManualsBrandsHP ManualsSoftwareHP Insight Management Agents for HP ProLiant 100 Series Servers
21222324252627282930
Managing ProLiant Servers with Linux – HOWTO v8.40
24
The cpqriisd service acts as an enabler for other ProLiant value-add software, such as the Rack Agent and the
Rack Upgrade Utility. This service is only applicable for p-Class blade systems.
If the service goes away after a few seconds, there is a failure to initiate communication with the iLO
management controller. The failure reason is logged in the message log. If the service is stopped, dependent
applications like the Rack Firmware Upgrade Utility terminate as well. Table 15 lists possible issues.
Table 15: cpqriisd messages
Message Number Details
Message 1 Could not setup server semaphores
Could not destroy server semaphores
Up sem: Ioctl Failure!
Down sem: Ioctl Failure!
Get sem: Ioctl Failure!
Set sem: Ioctl Failure!
Description These messages indicate that the synchronization objects called “semaphores”, cannot be
set up correctly. This issue most likely occurs because the iLO driver is absent.
Recommended
action
Install the iLO driver
Message 2 Warning: Shared Memory Segment exists
Killing process %s pid %dpgid %d
Description These messages indicate that the daemon encountered a shared memory segment that
was not cleaned up properly.
Recommended
action
No action is required since this message in informational. This warning will be removed
in a later version of the Rack Infrastructure Interface Service.
Message 3 Multiple copies of this daemon may be running – exiting…
Description This message indicates an issue with Rack Infrastructure Interface Service Version 1.0.0
which disallows the starting of two copies of the service.
Recommended
action
Only one copy of the daemon should be running at any time.
Message 4 Setup Shared Memory failed!
Description This message indicates that a common OS resource, “shared memory”, is not available.
This issue could be due to high utilization; but most likely a memory segment from an
earlier version of this service was left behind erroneously.
Recommended
action
Install the latest version of this service.
Message 5 Semaphore %s interrupted in %s
Local Semaphore %s interrupted in %s
Description This type of message will be logged if the service is terminated abruptly, for example,
through the “kill” command.