HP Insight Management Agents 8.40 Installation Guide

Installation instructions for Microsoft Windows 10
Table 2-3 Examples of single component installations
Command line input Result
cp002575 /s /f /r This command line installs the CP002575.EXE component, forcing the
component to install over an existing version, and enabling the server to
reboot automatically if needed. The GUI is not displayed.
Return codes
When each Smart Component has finished running, the component reports a return code to the operating system or
the calling application.
These return codes are used to determine the status of the component installation. You can also use return codes in a
script to control the execution of the script and to determine any branching that is required. Table 2-4 summarizes the
Smart Component return codes.
Table 2-4 Return codes
Error level Meaning
0 The Smart Component failed to install. For more information, see the log
file.
1 The Smart Component installed successfully.
2 The Smart Component installed successfully, but the system must be
restarted.
3
The installation was not attempted because the required hardware was not
present or the software was current.
Configuring the HP Event Notifier
When the system restarts after installing Insight Management Agents for Servers, the Event Notifier Configuration
Wizard runs to complete the installation process.
To initiate the configuration wizard, select Start > Programs > HP Management Agents > Event Notifier Config. Use
the configuration wizard to completely configure the notification service. To guide you easily through the process, the
wizard displays the following three screens:
• Welcome to the HP Event Notifier Configuration Wizard
• Mail (SMTP) Server Information
• Event Recipients Information