Integration for Tivoli

Installing the HP Insight Integration with the TEC 44

At the HP Insight Integration for Tivoli window, double-click Set Internet Browser Location. The

Configure_Internet_Browser window appears.

2. In the Path to Web Browser field, enter the location of your browser executable, and then click Set and

Close to complete the process.

Uninstalling the HP Insight Integration for Tivoli

If you uninstall the HP Insight Integration for Tivoli, a predefined script is provided in the Hpq/Plus/Utils

directory of Insight Integration files to simplify the process.

To uninstall a scripted or manual installation of the HP Insight Integration for Tivoli 5.1, run the

ins_cleanmod.sh script from a command line. The script ins_cleanmod_v30.sh uninstalls the Insight

Integration for TEC, Revision 3.0. These scripts are located in the Hpq/Plus/Utils directory of the Insight

Integration files and remove all installed components.

After the uninstallation process is complete, verify that the HP entries from tecad_snmp.cds and

tecad_snmp.oid files have been removed. Alternatively, manually remove them as detailed in the section

"Manually configuring the HP Insight Integration for Tivoli (on page 40)."

NOTE: These files are scripts and not executables. You must run these uninstall scripts from a

command line in the configured Tivoli environment, using an interpreter such as Bash.exe or

Sh.exe. An example is

sh ins_cleanmod.sh.