Version Control 7.3 Installation and Configuration Guide

Client requirements
Minimum requirements for client access to the HP VCRM are outlined.
Hardware and software requirements
Operating system
Microsoft Windows Server 2003
Microsoft Windows XP
Microsoft Windows Server 2008
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 SP1
Microsoft Windows Server 2008 R2 Foundation
Microsoft Windows Vista
Microsoft Windows 7
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Browser
Internet Explorer 6.0 with Service Pack 1 or later
Internet Explorer 7.0
Internet Explorer 8.0
Internet Explorer 9.0
Mozilla Firefox 3.0 or later
Note: Uploading software by way of the Mozilla browser interface is not supported.
System memory
256 MB of RAM for Microsoft Windows XP or Microsoft Windows Server 2003
Configuring Internet Explorer settings for HP SMH pre-configuration
Some features of the HP VCRM's browser interface depend on browser settings at the client system
from which the HP VCRM is being accessed. The security settings in Microsoft Internet Explorer
must be set to initialize the HP VCRM Upload process.
To configure the Microsoft Internet Explorer security settings:
1. From the Microsoft Internet Explorer toolbar, click Tools and select Internet Options. The Internet
Options dialog box appears.
2. Click Custom Level. The Security Settings dialog box appears.
3. Under ActiveX controls and plug-ins, Download signed ActiveX controls, select Enable.
4. Under Run ActiveX controls and plug-ins, select Enable.
5. Under Script ActiveX controls marked safe for scripting, select Enable.
The advanced settings in Microsoft Internet Explorer must be set to ensure that saving a copy of
the HP VCRM log functions when the log is cleared.
To configure the Microsoft Internet Explorer advanced settings:
HP VCRM requirements for Windows 27