HP Version Control 7.0 Installation and Configuration Guide

Pre-configuring and installing the Windows HP VCA component using HP
Smart Update Manager
This process installs the component with the configurations that are provided through the HP Smart
Update Manager.
To pre-configure the Windows HP VCA component using HP Smart Update Manager:
1. From the Integrity or ProLiant Support Pack for Windows, run hpsum.exe. The HP Smart
Update Manager Source Selections screen appears.
2. Click on Start Inventory button. The Select Installation Host(s) screen appears when the inventory
process is complete.
3. Select the Installation Host, and click Next to start the discovery process.
4. After the Discovery Process is complete, the Select Bundle Filter screen appears.
5. Select the appropriate bundle for the Operating System. Click OK. The Select Items to be
Installed screen appears.
6. Select the HP HP VCA for Windows component.
7. To pre-configure:
a. Click on Configure Now link next to the HP VCA component in the Optional Actions
column. The Version Control Agent Setup screen appears.
b. In the Computer Name field, enter the HP VCRM system name.
c. In the Login Account field, enter the System Management Homepage user name having
administrator or operator or user privileges for the HP VCRM system.
d. In the Password field, enter the password for the user name specified in Step 7.c.
e. Type the same password in the Confirm Password field.
f. Click Save to complete the HP VCRM configuration.
8. To install the HP VCA:
a. Select the HP HP VCA for Windows component, and click on the Install button.
b. To install the HP VCA as a single component, click on Deselect All button. Select only the
HP VCA for Windows component, and click on the Install button.
NOTE: If HP Smart Update Manager is available as a componentized executable in HP
VCRM repository, in order to avoid dependency installation failure, HP VCA will invoke HP
Smart Update Manager component installation for both Windows and Linux.
NOTE: If the System Management Homepage is not already installed, then select HP HP
SMH component for installation.
Installing the HP VCA without pre-configuration
You can install the HP VCA component interactively without any configurations. After installation,
you can configure the HP VCA settings at any time by browsing to HP VCA with HP SMH's
Administrator or Operator privileges.
28 Installing the HP VCA using the HP Smart Update Manager