HP Insight Control Server Provisioning 7.3 Update 1 Installation Guide
Table Of Contents
- HP Insight Control Server Provisioning 7.3 Update 1 Installation Guide
- Contents
- 1 Introduction/overview
- 2 Requirements and networking considerations
- 3 Installing your Insight Control server provisioning appliance for the first time
- Overview of the first time set up steps
- Get the software for a first time install
- Install Insight Control server provisioning on VMware vSphere/ESXi hypervisor
- Install Insight Control server provisioning on Microsoft Hyper-V hypervisor
- Log in to the appliance and configure appliance networking
- Accessing your appliance from a browser for the first time
- Next steps
- 4 Updating from version 7.2.2 to 7.3.1
- 5 DHCP server setup
- 6 Setting up the Media Server
- Introduction to the Media Server
- Introduction to the Insight Control server provisioning Media Server setup utility
- Requirements for setting up your Media Server
- Procedure for using the Insight Control server provisioning Media Server setup utility
- Changes made to your web server by Insight Control server provisioning Media Server setup utility
- 7 Generating and uploading WinPE to the appliance
- 8 Recommended actions after initial setup
- 9 Support and other resources
- 10 Documentation feedback
- A Updating from version 7.2 or 7.2.1 to 7.2.2
- Best practices for a successful update to 7.2.2
- Get the 7.2.2 update software and prepare it for use
- Prerequisites for update from 7.2/7.2.1 to 7.2.2
- Instructions for updating from 7.2 or 7.2.1 to 7.2.2
- What you need to do after installing the 7.2.2 update
- Changing from single NIC to multi-NIC (optional)
- Instructions for recovering from a failed 7.2.2 update
- REST API call to upload the 7.2.2 update file
- Glossary
- Index
• NTP servers
Information about the running appliance, including:
• All processes
• Memory
• Disk space
• Network statistics
• Routing
• Hardware information
Log data, including:
• All standard Linux operating system logs
• All appliance logs
• Logs from all jobs run in the past three days
• Installation logs
• The system audit log
Other information:
• Status report of all processes
• Dates of any certificates used
NOTE: The following types of items might be included in the support dump as a result of collecting
the data above:
• IP addresses (of the appliance, target systems, and connected browsers)
• Host names
• System UUIDs
• User names (no passwords are ever collected in a support dump)
• Network configuration information
• WWIDs
HP contact information
For the name of the nearest HP authorized reseller:
• See the Contact HP worldwide (in English) web page (http://welcome.hp.com/country/us/
en/wwcontact.html).
For HP technical support:
• In the United States, for contact options see the Contact HP United States web page (http://
welcome.hp.com/country/us/en/contact_us.html). To contact HP by phone:
◦ Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7
days a week. For continuous quality improvement, calls may be recorded or monitored.
◦ In other locations, see the Contact HP worldwide (in English) web page (http://
welcome.hp.com/country/us/en/wwcontact.html)
Subscription service
HP recommends that you register your product at the Subscriber's Choice for Business website:
http://www.hp.com/country/us/en/contact_us.html. After registering, you will receive email
56 Support and other resources