HP Insight Control Server Provisioning 7.3 Update 1 Installation Guide
Table Of Contents
- HP Insight Control Server Provisioning 7.3 Update 1 Installation Guide
- Contents
- 1 Introduction/overview
- 2 Requirements and networking considerations
- 3 Installing your Insight Control server provisioning appliance for the first time
- Overview of the first time set up steps
- Get the software for a first time install
- Install Insight Control server provisioning on VMware vSphere/ESXi hypervisor
- Install Insight Control server provisioning on Microsoft Hyper-V hypervisor
- Log in to the appliance and configure appliance networking
- Accessing your appliance from a browser for the first time
- Next steps
- 4 Updating from version 7.2.2 to 7.3.1
- 5 DHCP server setup
- 6 Setting up the Media Server
- Introduction to the Media Server
- Introduction to the Insight Control server provisioning Media Server setup utility
- Requirements for setting up your Media Server
- Procedure for using the Insight Control server provisioning Media Server setup utility
- Changes made to your web server by Insight Control server provisioning Media Server setup utility
- 7 Generating and uploading WinPE to the appliance
- 8 Recommended actions after initial setup
- 9 Support and other resources
- 10 Documentation feedback
- A Updating from version 7.2 or 7.2.1 to 7.2.2
- Best practices for a successful update to 7.2.2
- Get the 7.2.2 update software and prepare it for use
- Prerequisites for update from 7.2/7.2.1 to 7.2.2
- Instructions for updating from 7.2 or 7.2.1 to 7.2.2
- What you need to do after installing the 7.2.2 update
- Changing from single NIC to multi-NIC (optional)
- Instructions for recovering from a failed 7.2.2 update
- REST API call to upload the 7.2.2 update file
- Glossary
- Index
expect these keys. If you do not enter your product keys on this screen, you must modify the
HP-provided configuration files before they will work properly.
• Configure DHCP – Links to the Settings→Edit DHCP screen where you can configure your DHCP
settings and upload the required WinPE service OS to the appliance. A DHCP server is required
in order to provision servers. You may use the internal DHCP server supplied with the appliance
or an external DHCP server. Details on deciding whether to use a DHCP server internal or
external to the appliance and instructions for setting up an external DHCP server are in the
HP Insight Control Server Provisioning Administrator Guide, found at http://www.hp.com/
go/insightcontrol/docs.
The Settings→Edit DHCP screen is also where you can download the WinPE creation utility
and then also upload the WinPE service OS once it is created. (WinPE is not packaged with
the appliance.) See “Generating and uploading WinPE to the appliance” (page 48) for more
information.
• Walk through the Quick Start – The Quick Start is a task-based set of instructions available in
the online help that gets you started doing real tasks with Insight Control server provisioning
right away. The Quick Start also contains links to introductory material that will help you
become familiar with Insight Control server provisioning.
54 Recommended actions after initial setup