HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

script step. For example, if the file share where the zipped HP SUM log file is to be copied to is mounted on

/mnt/media and the destination directory is "hpsum_logs", then specify

--hpsum_logs_dump_dir=/mnt/media/hpsum_logs.

 --no_show_log – Do not display the hpsum_log.txt contents in the job log.

Custom Attributes: None

Update Intelligent Provisioning Firmware

Updates the Intelligent Provisioning (IP) firmware on a ProLiant Gen8 or newer target server. This script must be run

while PXE booted in the LinuxPE service OS. PXE booting is required as the IP cannot be flashed while it is actively

booted. It uses the utilities and functions provided in IP Recovery media for update. This script expects the IP location on

the Media Server to be \Media\ip\x.xx where x.xx is the IP version number, for example 1.60 without the period. This

script is run after the Set Media Source script since requires connection to the media server.

Type: Unix

Optional Parameters:

 --ip_version=directory_name - The name of the directory containing the IP to be installed, such as 1.60. If the

value is blank or ‘latest’, the script automatically selects the directory with the latest version as determined by

sort order.

Custom Attribute: None

Validate Custom Attributes

Validates that the specified custom attributes exist and have values assigned.

This script is used early in a build plan to check that required custom attributes are defined and have non-null values

before proceeding with the rest of the build plan. It validates the custom attributes defined in the parameter field and

fails the build plan if any custom attribute does not have a value associated with it. Indicating no parameters will cause

this script to do nothing and end successfully.

Type: OGFS

Required Parameters:

 --custAttrNames "custAttrName1 custAttrName2 custAttrName3 ... custAttrNameN" The parameter list is a

space-separated list of custom attribute names contained inside double quotes.

Custom Attributes: None

Validate Gateway Setting for Static Network Configuration

Verifies that a gateway (gw) has been specified when using static network configuration. Some operating systems

require a gateway when doing a static network configuration.

When a build plan is run and the Configure static network information option is selected, a custom attribute named

hpsa_netconfig is automatically created for each target server on which the build plan is run. hpsa_netconfig contains

the static network settings that are applied to that particular target server. This script is used early in the build plan to

check if a gateway is defined in hpsa_netconfig before proceeding with the rest of the steps in the build plan. The build

plan will fail if the gateway is not specified. If hpsa_netconfig does not exist, this script will skip the gateway validation

and proceed with the remaining steps in the build plan.

Type: OGFS

Required Parameters: None

Optional Custom Attribute: hpsa_netconfig

Validate ImageX Package Contents

Verifies that the ImageX package contains imagex.exe.