HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

52
o during the next reboot.
post-exitpoint to write info file that the installation has finished
Type: OGFS
Required Parameter:
HP SA Agent Name - The SA agent that needs to be started during installation.
Custom Attributes: None
Inject Required ESXi 5 Kickstart Settings
This script injects required settings into the kickstart answer fill.
This script modifies the Kickstart file and adds scripting that will allow IC server provisioning to monitor and control the
operating system installation.
Type: OGFS
Optional Parameter:
accept-encrypted-password - accept the password to be encrypted, which for ESXi is not typically allowed.
Custom Attributes: None
Inject Required Kickstart Settings
This script injects required settings into the kickstart answer file.
It appends code to the %pre section of the kickstart file, to start the agent before the installation starts. It also injects
code into the %post section to prevent the installer from rebooting after the installation is complete. The later gives the
target a chance to integrate the HP SA agent.
Type: OGFS
Parameters: None
Custom Attributes: None
Inject Required Unattend.xml Settings
This script injects required settings into the unattend answer file.
This script modifies the unattend file and adds scripting that will allow IC server provisioning to better monitor and
control the operating system installation.
Type: OGFS
Optional Parameter:
PATH_TO_FILE - An alternate path to the Unattend.xml file may be specified. This parameter can normally be
omitted and the script will use the standard file locations. The following path locations are checked (in order),
and if that file exists, it is updated and no further files are checked: X/Windows/Temp/Unattend.xml,
C/Windows/Panther/unattend.xml
Custom Attributes: None
Inject Windows Domain or Workgroup Personalization Settings
This script injects Windows Active Directory Domain or Workgroup related configuration into the unattend answer file as
part of a Windows OSBP. Values are read from custom attributes and inserted into the unattend file. Supported for
Windows Server 2008 and later releases.
Type: OGFS
Optional Parameter: