HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

48
4. Update the ProLiant Drivers for Windows XXX OSBP step to use X:\$oem$ as the directory path
parameter. This is necessary since C: partition will no longer be available with the removal of Create
Windows System Drive step.
NOTE: The X: (WinPE) drive is a RAM disk that only exists in memory. It is possible that the combined size
of the drivers may be too large to fit in the available RAM disk space. If this occurs, please consider using
Option #1 above.
Type: Windows .BAT
Parameters: None
Optional Custom Attributes:
 SystemDrive
 SystemDiskNumber
Decommission Server
Decommissions the secure agent connection between a target server in production and the appliance to allow for
reprovisioning of the target server.
Target servers provisioned by IC server provisioning contain certificates that uniquely and securely identify the server to
the appliance. The appliance expects to retrieve this information every time the target server boots. This can cause
problems when attempting to reprovision a server or when a server’s hard drive is erased, as the service OS may not be
able to retrieve these certificates. This script decommissions a server, breaking that security bond, and allowing a server
to boot into maintenance without requiring the identification certificates.
If this script is run against a server that does not have an established secure agent connection, the script exits and the
build plan continues without error.
CAUTION: Because of the way this script works, it can only be placed in a build plan after the first Boot step and before
the Wait for SA Agent step. Placing this script anywhere else will likely cause the build plan to fail.
CAUTION: This script breaks the secure agent connection between the target server and the appliance. Only run this
script against a target server if you are certain you will never boot the server back into its production operating system.
Type: OGFS
Parameters: None
Custom Attributes: None
Delete iLO User
Deletes an iLO user using the ProLiant Scripting Toolkit hponcfg utility.
Type: OGFS
Required Parameters:
 --username=USERNAME - Username of the iLO user to delete.
Custom Attributes: None
Deploy Agent
Deploy an SA agent to the target server.
This script is typically used to deploy an agent to the stub partition in preparation for a Linux installation. This agent is
used to communicate with the server during the operating system installation and is not the same agent that is placed
on the production server.
Type: Unix
Required Parameters:
 -d DEST, --dest=DEST Where to download the agent. This can be both a file or a directory, absolute or relative.
Directories will be created if they don't exist. The default is to create a file in the current directory with the