HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

45
unnecessarily fail if the iLO registration process is still in progress. The Check iLO Service script is added at the head of
most build plans before the Boot step to verify that the target server has a valid iLO registered. If no iLO is registered,
the script will wait some amount of time to allow the iLO to complete its registration. Once the iLO becomes registered,
the step completes and the build plan continues. If no iLO is found before the timeout, the script fails and halts the build
plan.
To deploy to a Virtual Machine target, this script step should be removed.
Type: OGFS
Optional Parameter:
 --atMost=minutes where minutes is the time before timing out. Default is 10 minutes.
Custom Attributes: None
Configure Fibre Channel HBA Boot Device
Configures a QLogic or Emulex HBA, or Emulex CNA boot device by applying the configuration specified in the
HBA_Config multi-line custom attribute.
Type: Python
Optional Parameter:
 --displayHbaOnly - Show the HBA or CNAs on the target server, but doesn’t apply the configuration.
Required Custom Attribute:
 HBA_Config – Required for configuration operations. See How do I Configure the boot device on a Fibre Channel
HBA in the Insight Control Server Provisioning online help for full details about how to set this custom
attribute.
Configure NIC Teaming for Windows
Creates a NIC team on target servers with Windows 2012 or later. The step takes a comma separated list of parameters
which specify exactly which NICs will be teamed together.
Type: Windows .BAT
Required Parameters:
 Field Name – lists the NIC characteristic that will be specified in the other parameters. Valid field names are:
 Name
 InterfaceDescription
 ifIndex
 Status
 MacAddress
 LinkSpeed
 Values - The value(s) to be checked for that corresponds to the specified Field Name parameter. Note that no
extra spaces should be used when specifying parameters.
Table 9 is an example that represents the NICs on a target server with Table 10 as examples of parameters to provide
to the script.
Table 9: Configure NIC Teaming for Windows sample network adapters on a target server
Name
InterfaceDescription
ifIndex
Status
MacAddress
LinkSpeed
Ethernet
HP NC553i Dual Port FlexFabric 10G
16
Up
18-A9-05-C5-E1-B7
10 Gbps
Ethernet 2
HP NC553i Dual Port FlexFabric 10G...#1
15
Disconnected
18-A9-05-C5-E1-B3
10 Gbps