HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

ProLiant OS - Windows 2008 SP2 Standard x64 Image Install

ProLiant OS - Windows 2008 R2 SP1 Standard x64 Image Install

ProLiant OS - Windows 2012 Standard x64 Image Install

ProLiant OS - Windows 2012 R2 Standard x64 Image Install

Applies a previously captured Windows WIM image. This build plan is used to clone servers using an image captured

from a reference server.

Requirements:

 HP ProLiant server with iLO and similar hardware as the reference server.

 A previously captured WIM image on Media Server.

 A WinPE image has been generated by the WinPE image generation utility and uploaded to the appliance using

Settings > DHCP page. Uploading a WinPE image to the appliance also adds the imagex.exe utility which is

required for all image capture and deploy operations. The ImageX package shipped with the appliance does not

contain the actual imagex.exe utility by default due to licensing restrictions.

Required Custom Attributes:

 ProductKey_xxx-yyy corresponding to the selected version of Windows, set using the Settings > Product Key

page where xxx is the Windows version and yyy is the architecture version.

 WimFileName - A previously captured image file name

Optional Custom Attributes:

 ComputerName – Network name of the installed target server. Follow NetBIOS guidelines and 15 character

limit.

 EncryptedAdminPassword – Administrator password in encrypted form. Refer to the HP Insight Control Server

Provisioning online help on how to create an encrypted password.

 SystemDrive – Drive label for the system drive the operating system is installed

 SystemDiskNumber – Physical drive number for the system drive the operating system is installed. This

custom attribute is not meant to be set by the end user. It is set automatically during build plan execution and

is used to make sure the Windows installer does not install to the Intelligent Provisioning flash drives. During

re-provisioning, this value might be left over from a previous installation and cause the install to fail. Deleting

the custom attribute before running the build plan solves this.

ProLiant OS - Windows 2008 SP2 Standard x64 Scripted Install

ProLiant OS - Windows 2008 R2 SP1 Standard x64 Scripted Install

ProLiant OS - Windows 2012 Standard x64 Scripted Install

ProLiant OS - Windows 2012 R2 Standard x64 Scripted Install

Performs a scripted install of the selected Windows version using a generic unattend file.

IMPORTANT: Beginning with IC server provisioning 7.3.1, multiple WinPE PXE versions are provided. Windows 2008 SP2

and Windows 2008 R2 SP1 may only be installed using WinPE 3.1 PXE version or Intelligent Provisioning v1.50 or earlier

which is based on WinPE 3.0.