HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

38
 encrypted_root_password – root password in encrypted form. Refer to the HP Insight Control Server
Provisioning online help on how to create an encrypted password.
 boot_disk – disk on which Linux is installed, for example sda, hdc, cciss/c0d1
 kernel_arguments – additional kernel arguments for the installed Linux kernel
ProLiant OS - SLES11 SP2 x64 Scripted Install
ProLiant OS - SLES11 SP3 x64 Scripted Install
Performs a scripted install of the selected SUSE Enterprise Linux version using a generic autoyast file.
NOTE: To install SUSE on some newer ProLiant Gen8 servers, special kISO bootloader support is required. Refer to the IC
server provisioning On-line Help.
Requirements:
 HP ProLiant server with iLO
 IC server provisioning Media Server must contain the OS distribution
Optional Custom Attributes:
 encrypted_root_password – root password in encrypted form. Refer to the HP Insight Control Server
Provisioning online help on how to create an encrypted password.
 boot_disk – disk on which Linux is installed, for example sda, hdc, cciss/c0d1
 kernel_arguments – additional kernel arguments for the installed Linux kernel
ProLiant OS - Windows 2008 SP2 Standard x64 Image Capture
ProLiant OS - Windows 2008 R2 SP1 Standard x64 Image Capture
ProLiant OS - Windows 2012 Standard x64 Image Capture
ProLiant OS - Windows 2012 R2 Standard x64 Image Capture
Captures the selected version of Windows into a WIM image.
The WIM image can then be used to clone multiple target servers.
IMPORTANT: Upon completion of the build plan, the reference server from which the image was captured is left in a
depersonalized state.
Requirements:
 HP ProLiant server with iLO must be powered on and running the Windows OS to be captured.
 Media Server share must be writeable.
 A WinPE image has been generated by the WinPE image generation utility and uploaded to the appliance using
Settings > DHCP page. Uploading a WinPE image to the appliance also adds the imagex.exe utility which is
required for all image capture and deploy operations. The ImageX package shipped with the appliance does not
contain the actual imagex.exe utility by default due to licensing restrictions.
Required Custom Attribute:
 WimFileName - The file name where the captured image will be stored on the Media Server.
Optional Custom Attribute:
 CaptureDrive – Drive letter with colon of the default drive from where ImageX will capture the system
partition. Default value is set to C: in the parameter field for Capture Windows Image build plan script.