HP Insight Control Server Provisioning 7.3 Update 1 Build Plans Reference Guide

where username:password are the credentials for the media server, and mount_point is the share that

will be mounted. Optionally, all three custom attributes can be replaced with customized values as long as it

conforms to URI specification above. Note that the noserverino option is neccessary when mounting a

Windows share using the Linux service OS Samba client.

 LinuxPE add-on packages – Refer to Table 6 – ProLiant HW – System ROM Configuration Boot from SAN build

plan sample and the detailed description in the Steps 4 to 6 – Prepare for hardware configuration section.

Steps 7 to 9 – Perform the update and post-install tasks

These final steps actually perform the firmware update and perform a reboot of the server.

 Update Firmware Using SPP – This step actually runs the HP Smart Update Manager to upgrade the firmware on

the target server. Since the Media Server can contain several SPP versions, this script takes a parameter with a

SPPversion custom attribute name to assign a specific SPP version or it’ll use the latest in the Media Server.

This script expects the SPP location on the Media Server to be /Media/SPP/yyyy.mm.x where

yyyy.mm.x is the SPP version number. This path cannot be easily changed.

 Boot – Reboots the target server back into the service OS to force the ProLiant Scripting Toolkit utility changes

to be available at next reboot.

 Wait for HP SA Agent – This is the same step as before, but this time it is waiting for the agent to register in

production mode.

Sample Build Plan: Combination Hardware, Windows Scripted Install, and

SPP

Table 8 – ProLiant COMBO - BFS + Windows 2012 R2 + SPP build plan sample

Step

Number

Step Name

Step Type

Step Parameters

Validate Custom Attributes

OGFS

--custAttrNames "ProductKey_Win2012-Std-x64"

Check iLO Service

OGFS

Verify Supported Boot Modes

OGFS

--secure=disabled

Boot

OGFS

--serviceOS=winpe64

Decommission Server

OGFS

Wait for HP SA Agent

OGFS

--maintenance --atLeast=3 --atMost=20

LinuxPE add-on packages

Install ZIP

ProLiant Scripting Toolkit for Linux x64

Deploy package

System ROM Configuration – Enable Boot from SAN

Deploy configuration file