HP Insight Control Server Provisioning 7.2 Update 2 Installation Guide

Figure 8 Appliance IP configuration edit fields
Enter the networking information for the Appliance as follows:
• Host name: This is the host name of the appliance. From a supported browser, you can navigate
to the appliance by using this name or by using the appliance IP address.
If you are supplying a DNS server, this host name must be fully qualified.
• IP address: This is the IP address you are assigning to this appliance (the Appliance IP). Use
this IP address to browse to the appliance via a supported browser. The Appliance IP is always
on the first network interface.
• Subnet mask or CIDR: This field is required. Specify the mask representing the bits reserved
for network identification (for example, 255.255.255.0), or the Classless Internet Domain
22 Installing your Insight Control server provisioning appliance for the first time