HP Insight Control Server Provisioning 7.2 Update 2 Installation Guide

Figure 3 Multi-NIC Mode with Matrix OE Example
Target Server
Production Network
iLO can be
connected to
either network
Deployment Network
Management Network
NIC
Production NIC
NIC
Deployment NIC
iLO
Management
web browser
Media Server
Internet
IC server provisioning
Appliance
NIC 1
Appliance IP
NIC 2
Deployment IP
NIC
Appliance IP
NIC
Deployment IP
MOE CMS
In the Multi-NIC mode with the Matrix Operating Environment configured; note that the Matrix
Operating Environment CMS requires a NIC on both the Appliance and Deployment networks.
DHCP considerations
Insight Control server provisioning requires a DHCP server to provide IP addresses to target servers
during the provisioning process. Insight Control server provisioning has a DHCP server internal to
the appliance you may use, or you can set up your own DHCP server external to the appliance.
See “DHCP server setup” (page 34) for information on deciding whether to use a DHCP server
internal or external to the appliance and instructions for how to set up an external DHCP for use
with the appliance.
DHCP considerations 11