HP Insight Control Server Provisioning 7.2 Online Help

Table 5 Optional custom attributes of interest for servers (continued)
Example valuesDescriptionName
This is 15 characters, maximum.
Follow NETBIOS rules.
Windows OS only.
NOTE: If you specify a computer
name with network personalization
when running a Build Plan, it will
override this name.
Used to set the “Administrator”
password on a new installation. By
AdminPassword
default, ProLiant Build Plans expect a
string that has already been
encrypted. You can modify the
configuration file so it will accept an
unencrypted value.
The default value is
ChangeMe123!
encrypted.
CAUTION: HP strongly recommends
changing this password before
deploying to any servers.
For Linux and ESX deployment:
“noapci”, “root=LABEL=/”, “quiet”,
“splash”
Used to specify additional arguments
to the kernel where the installation is
running.
kernel_arguments
NOTE: For servers with B120i and
B320i controllers, the custom attribute
kernel_arguments must be set to
blacklist=ahci for Red Hat
installations or
broken_modules=ahci for SLES
installations.
Used to set the “root” password on a
new installation. By default, ProLiant
root_password
Build Plans expect a string that has
already been encrypted. You can
modify the configuration file so it will
accept an unencrypted value.
The default value is
ChangeMe123!
encrypted.
CAUTION: HP strongly recommends
changing this password before
deploying to any servers.
“sda”, “hdc”, “cciss/c0d1”Determines which disk to install the
OS to.
boot_disk
4.2.3 Rules for custom attributes
• The name may not contain spaces or special characters. It may contain numbers, underscores,
and dashes.
36 Servers