HP Insight Control Server Provisioning 7.2 Online Help

Table Of Contents
3. Select >> Current Version.
4. Select >> Download next to the Complete ISO Image selection.
5. Enter your HP Passport user ID and password.
6. Follow the instructions to download the SPP ISO file.
Procedure 10 To copy an SPP to your Media Server
The HP-provided OS Build Plans that deploy SPPs require the SPP contents to be in the directory
<File share name>/Media/spp on your Media Server. Each SPP version has its own folder
and the folder name must be the SPP version. For example, if the SPP is version 2012.08, the
contents of the SPP should be copied to
<File share name>/Media/spp/2012.08
on your Media Server.
For a Windows Media Server:
1. Using your favorite Windows ISO mounting utility, mount the SPP ISO onto a folder accessible
from your Media Server. The folder does not have to be on the Media Server but it must be
accessible from the Media Server via a mapped network drive. You may mount the ISO on
a Linux system as long as you can map a network drive to it from your Media Server.
2. Follow the instructions in the HP Insight Control Server Provisioning Installation Guide to
download the HP Insight Control server provisioning Media Server setup utility and use it to
copy the SPP ISO into the appropriate folder on your Media Server.
For a Linux Media Server
1. Mount your SPP ISO using the Linux mount command with the -o loop option.
2. Under the directory you are exporting via NFS, create the Media/spp/<SPP version>
directory, where <SPP version> is the version of your SPP as described above.
3. Copy the contents of the SPP to the Media/spp/<SPP version> directory.
Procedure 11 To run the ProLiant SW Offline Firmware Update OS Build Plan
You may use the HP-provided ProLiant SW Offline Firmware Update Build Plan to
update the firmware on target servers. It is important to note that the offline firmware update is
performed from the Linux service OS, not production OS, which means the server will be rebooted
into the Linux service OS if it is not there already.
Note that when performing an offline firmware update, only the firmware components are installed
from the SPP; software and driver components are not installed.
26 How Do I ... ?