HP Insight Control 7.3 Update 1 Release Notes

HP ProLiant ML 350p Gen8 and ProLiant DL360p Gen8 Linux node Storage subsystem values
display “0” value for status counters in Online Analysis
HP ProLiant ML 350p Gen8 and ProLiant DL360p Gen8 Linux node displays values for the array
controllers status counters, but for the storage subsystem it displays "0" values for status counters
in online analysis.
Insight managed system setup wizard
Limitations
Privilege elevation configuration that requires a password by the privilege elevation tool is not
supported
The Insight managed system setup wizard supports privilege elevation only on a CMS that has
privilege elevation configured so that no password is required by the privilege elevation tool (such
as su and sudo). If you attempt to configure features when privilege elevation is turned on and this
requires a password, you may see failures in the wizard's execution output.
Suggested action
If a feature fails to configure correctly because of privilege elevation password requirements,
configure the feature outside of the managed system setup wizard.
To turn off the requirement for a password, use the HP SIM Options ⇒ Security ⇒ Privilege Elevation
menu, and uncheck the check box labeled “A password is required for this privilege elevation
tool”. Note that systems managed by the CMS must be reconfigured to reflect this configuration
change.
HP iLO 3 support
HP iLO 3 is supported in the current release of Insight managed system setup wizard. However,
iLO 3 for ProLiant requires a minimum of firmware version 1.05.
Suggested action
Update iLO 3 ProLiant firmware to version 1.05 or newer.
The Insight managed system setup wizard does not configure HP Integrity rx2620
In this release, using the managed system setup wizard to configure an HP Integrity rx2620 server
is not supported.
Suggested action
Manually configure HP Integrity rx2620 servers.
Major issues
Patch required to register Integrity VM hosts running Integrity VM 4.1 or higher and 11.31 HA-OE
or DC-OE
The Insight managed system setup wizard fails to register Integrity VM hosts running Integrity VM
4.1 or higher and either the 11.31 High Availability Operating Environment (HA-OE) or the 11.31
Data Center Operating Environment (DC-OE).
Suggested action
Apply the patch PHSS 40784 to the HP-UX 11i v3 Integrity VM host. The patch is needed on
systems where Serviceguard is installed, but the systems are not actively in a Serviceguard cluster.
Serviceguard is included with the HP-UX 11i v3 HA-OE and DC-OE. You can download this patch
from https://hpsc-itg1.austin.hp.com/portal/site/hpsc/public. To download the patch, enter and
search the patch number in Search: HP Support Center.
NOTE: You can download the required patch based on the OS version and patch updated date.
Issues and suggested actions 29