HP Insight Control 7.3 Update 1 Release Notes

If a VMware ESXi 4.x host is managed by VMware vCenter 4.x in a lockdown mode, then these
hosts cannot be monitored and managed by Insight Control components by providing the root
credentials
If a VMware ESXi 4.x host is managed by VMware vCenter 4.x in a lockdown mode, then these
hosts cannot be monitored and managed by Insight Control components by providing the root
credentials. A privileged user (for example, <remmgr>), must be created on each of the VMware
ESXi 4.x hosts that must be managed by vCenter 4.x in lockdown enabled mode
If the IP address of the host changes, virtual machine management cannot manage the host
If the IP address of a hypervisor host is changed, virtual machine management will not be able to
manage the host.
Suggested action
HP recommends that you unregister the hypervisor host before changing the IP address. After the
IP address is changed, identify the host in HP Systems Insight Manager and register with virtual
machine management. If the IP address is changed without unregistering the host, unregister the
host with the old IP address using the vmcli tool and register with the new IP address.
Minor issues
Microsoft Windows 2012 and Microsoft Windows 2012 R2 guest NIC customization fails for
static IPv4 on Microsoft Windows 2012 R2 host
If you try to sysprep the guest using the command
C:\Windows\System32\Sysprep\Sysprep.exe on the guest VM, it does not set the static
IPv4 address but successfully sets the IPv6 address. Simultaneously, the IPv4 gateway successfully
sets, but other fields like IP address and Subnet mask are disabled for IPv4.
Suggested action
To resolve this issue, set the IPv4 address manually on the guest.
Virtual machine names do not display correctly
Virtual machine names may not be displayed correctly in the virtual machine management user
interface if the virtual machine name contains special characters.
Suggested action
HP recommends avoiding special characters in virtual machine names. Rename such virtual machine
names appropriately.
Host/Guest control buttons disabled
If the virtual machine names have non-ANSI characters, the control buttons in the Host/Guest
system page are disabled.
Suggested action
From the HP Systems Insight Manager user interface, run Tools ⇒ Virtual Machine, then select the
appropriate control operations
HP Insight Control performance management
Limitations
The left hand side pane appears blank in Insight Control performance management
The left hand side pane appears blank and is not displayed for the offline analysis on Insight
Control performance management when NIC teaming is configured on the monitored server, with
a non-English adapter name.
26 Insight Control release notes