HP Insight Control for Linux 6.0 Support Matrix

Table 3-3 Supported DL series servers (continued)
System ROM (BIOS)
version
Supported as a
managed
system?
Supported as
a CMS?NoteModel number
Supported by HP
Insight Control
power
management?
NoYesYesDL585 G6
NoYesYesDL785 G5
NoYesYesDL785 G6
1 The minimum firmware version is the firmware version delivered in the initial release of the server.
2 By default, the DL180 G5 server ships without an LO100 Management Card. To achieve full Insight Control for Linux
functionality on the DL180 G5 server, it must be configured with an HP LO100c Remote Management Card, Part #
445513-B21. See the DL180 G5 QuickSpecs for more information.
3
This server requires an updated initrd file. See Section 7.3.1 in the HP Insight Control for Linux User Guide for more
information.
3.4 ML series servers
Table 3-4 lists the HP ProLiant ML series servers that are supported for use with Insight Control
for Linux.
These servers were qualified with the iLO management processor firmware version 1.79. These
servers were qualified with the latest System ROM (BIOS) firmware version on the HP ProLiant
Firmware Maintenance CD Version 8.60. For more information on the HP ProLiant Firmware
Maintenance CD, see “ProLiant Firmware Maintenance CD” (page 18).
Table 3-4 Supported ML series servers
Supported by HP Insight
Control power
management?
Supported as a
managed system?Supported as a CMS?Model number
NoYesNoML310 G5
NoYesNoML310 G5p
NoYesNoML330 G6
YesYesNoML350 G5
YesYesNoML350 G6
YesYesNoML370 G5
YesYesNoML370 G6
3.5 SL series servers
Table 3-5 lists the HP ProLiant SL series servers that are supported for use with Insight Control
for Linux as well as the System ROM (BIOS) that is required for the server to be supported under
Insight Control for Linux.
These servers were qualified with the LO100i firmware version 9.19.
These servers were qualified with the latest firmware version on the HP ProLiant Firmware
Maintenance CD Version 8.60. For more information on the HP ProLiant Firmware Maintenance
CD, see “ProLiant Firmware Maintenance CD” (page 18).
14 Supported servers and enclosures