HP Insight Control Virtual Machine Management 6.0

To unregister virtual machine hosts, from the HP SIM toolbar, select Configure→Virtual Machine→Unregister
Virtual Machine Host
If the virtual machine hosts are not unregistered, then an error message appears when you attempt to register
the virtual machine host to the new HP SIM CMS.
If the original HP SIM CMS is not available, then register the virtual machine hosts to the new HP SIM CMS:
1. Restart the VMM Agents on the virtual machine host.
2. To register the virtual machine host on the new CMS, select Configure→Virtual Machine→Register
Virtual Machine Host
Hardware
Re-entering the server serial number and product ID
After replacing a system board, you must re-enter the server serial number and the product ID. Improperly
entering the serial number can consume an additional Insight Control license.
To avoid consuming an additional license, see the maintenance and service guide for your server platform
at http://www.docs.hp.com for information about re-entering the server serial number.
Additional resources
The HP ProLiant Servers Troubleshooting Guide provides procedures for resolving common problems, and
a comprehensive course of action for fault isolation and identification, error message interpretation, issue
resolution, and software maintenance.
To obtain the guide, see any of the following sources, and then select the HP ProLiant Servers Troubleshooting
Guide.
• The server-specific Documentation CD
• The Business Support Center at http://www.hp.com/support. You can find the guide by using the
navigation features on the HP website.
• The Technical Documentation website at http://www.docs.hp.com. Select Enterprise Servers→
Workstations and Systems Hardware, and then select the appropriate server.
62 Troubleshooting