HP Insight Control for Linux 7.1 Update 1 Release Notes

Download AddressArchitecture
Operating
System
Copy the KISO into the repository; see the section titled “Copying SLES 10 SP4 or
SLES 11 SP1 (KISO) into the repository” in the HP Insight Control for Linux User Guide.
x86 system
configured for
RAID
1
Then download and install this customized initrd file for the RAID driver:
ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p776390032/v78164
Copy the KISO into the repository; see the section titled “Copying SLES 10 SP4 or
SLES 11 SP1 (KISO) into the repository” in the HP Insight Control for Linux User Guide.
x86_64 system
configured for
RAID
1
Then download and install this customized initrd file for the RAID driver:
ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p503085154/v78285
ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p2020559235/v77039x86
SLES 11 SP2
ftp://ftp.hp.com/pub/softlib2/software1/pubsw-linux/p1511602699/v77028x86_64
1
For servers configured with an HP SmartArray B120i or B320i RAID controller that is enabled in the BIOS.
3.2.2.1 Update to Section 9.5.3, Required kernel parameters for installing x86 SLES operating
systems on various servers
The updated list of servers is:
• DL165 G7• SL165s G7• BL465c G7
• • DL385 G7• SL165z G7BL685c G7
•• DL685 G7SL4545 G7
The kernel parameters are unchanged:
Use this kernel boot parameter:For this operating system:
pci=nomsiSLES 10 SP3 (x86)
pci=nomsiSLES 10 SP4 (x86)
Not applicableSLES 11 SP1 (x86)
3.2.3 Updates to Section 20.3, Using Nagios
Insight Control for Linux is now integrated with a newer version of Nagios. The following illustrations
depict the newer version of Nagios.
3.2 HP Insight Control for Linux User Guide 19