HP Insight Control for Linux 6.1 Support Matrix

A Functionality based on MP license
The following table correlates functionality with the presence or absence of the LO100i
management processor license; the management processor is required for all capabilities of
Insight Control for Linux
In general, LO100i-based servers are the DL100
1
and SL100 series servers. See the Quickspecs
for details for a specific server.
Table A-1 Insight Control for Linux functionality for supported servers with LO100i MPs
Note
Insight Control for Linux
VersionLO100i Advanced License
Insight Control for Linux
Functionality
IPMI capability through
ipmitool
2.10 and higherSupported without licensePower On/Off/Reset Server
IPMI capability through
ipmitool
2.10 and higherSupported without licenseBare Metal Discovery (PXE)
IPMI capability through
ipmitool
2.10 and higherSupported without licenseInstall (PXE)
IPMI capability through
ipmitool
2.10 and higherSupported without licenseCapture (PXE)
IPMI capability through
ipmitool
2.10 and higherSupported without licenseDeploy (PXE)
IPMI capability through
ipmitool
2.10 and higherSupported without licenseMonitoring (health and
performance)
Used by the Insight Control
for Linux console
monitoring facility (cmfd).
2.10 and higherAvailable without licenseRemote Management
Console (text-based)
LO100i Advanced license
required for web-based
management console.
Insight Control for Linux
does not use or provide this
capability.
2.10 and higherLicense required for
availability
Remote Management
Console (web-based, GUI)
LO100/vMedia does not
support any programmatic
interfaces.
Not supportedVirtual Media
HPSUM supports DL100
and SL100 series servers.
6.1Supported without licenseFirmware updates (through
HPSUM)
The following table correlates functionality with the presence or absence of the iLO Advanced
License for iLO-based servers.
NOTE: As of Insight Control for Linux 6.0, an Insight Control for Linux license includes an iLO
Advanced license, which increases functionality.
In general, iLO-based servers are the BL series, DL300, DL500, and DL700 series, and the ML
series servers. See the Quickspecs for details for a specific server.
1. For full Insight Control for Linux functionality, the DL180 G5 server should be configured with the HP LO100c
Remote Management Card.
25