HP Insight Control for Linux 6.1 Support Matrix

Table 3-4 Supported DL series servers (continued)
(DL100 series) System
ROM (BIOS) version
Supported by HP
Insight Control power
management?
Supported as a
managed
system?
Supported as
a CMS?
See the Note at
the end of this
tableModel number
YesYesYesDL360 G7
YesYesYesDL365
YesYesYesDL365 G5
YesYesYes
4
DL370 G6
YesYesYesDL380 G5
YesYesYesDL380 G6
YesYesYesDL380 G7
YesYesYesDL385 G2
YesYesYesDL385 G5
YesYesYesDL385 G5p
NoYesYesDL385 G6
NoYesYesDL385 G7
NoYesYesDL580 G4
NoYesYesDL580 G5
NoYesYes
5
DL580 G7
NoYesYesDL585 G2
NoYesYesDL585 G5
NoYesYesDL585 G6
NoYesYesDL585 G7
NoYesYesDL785 G5
NoYesYesDL785 G6
1 This server requires System ROM (BIOS) version 10/23/2008 or greater.
2 The LO100i firmware version for this server is 4.20, not 3.11
3 By default, the DL180 G5 server ships without an LO100 Management Card. To achieve full Insight Control for Linux
functionality on the DL180 G5 server, it must be configured with an HP LO100c Remote Management Card, Part #
445513-B21. See the DL180 G5 QuickSpecs for more information.
4
This server requires an updated initrd file. For the web addresses of the initrd files, see the update to Table 7-2,
Download web address for initrd files, in the HP Insight Control for Linux Release Notes.
5
Installing SLES 11 on this server over the network requires an updated initrd file. For the web addresses of the
initrd files, see the update to Table 7-2, Download web address for initrd files, in the HP Insight Control for Linux
Release Notes.
3.5 ML series servers
The ML series servers feature iLO2 and iLO3 management processors.
Table 3-5 lists the HP ProLiant ML series servers that are supported for use with Insight Control
for Linux.
12 Supported servers and enclosures