HP Insight Control for Linux 6.0 Support Matrix

Table 3-1 Supported c-Class server blades (continued)
Supported by HP
Insight Control
power
management?
Supported as a managed
system?Supported as a CMS?NoteModel number
YesYesYesBL680c G5
YesYesYesBL685c
YesYesYes
2
BL685c G5
YesYesYes
2
BL685c G6
1 The minimum firmware version is the firmware version delivered in the initial release of the server.
2
Installing RHEL 4.7 or SLES 10 SP 2 over the network requires an updated initrd file. See Section 7.3.1 in the HP
Insight Control for Linux User Guide for more information.
3
Installing RHEL 4.7, RHEL 5.2, or SLES 10 on this server over the network requires an updated initrd file. See
Section 7.3.1 in the HP Insight Control for Linux User Guide for more information.
How to obtain updated firmware
You can obtain updated firmware for c-Class server blades from the ProLiant Firmware
Maintenance CD included with the HP ProLiant Software Maintenance Pack, or you can go to
the following website:
http://www.hp.com/go/bladesystemupdates
3.2 c-Class enclosures
Table 3-2 lists the supported HP BladeSystem c-Class enclosures and the minimum firmware
version for the Onboard Administrator (OA) that has been tested with Insight Control for Linux.
Table 3-2 Supported c-Class BladeSystem enclosures
Supported by HP Insight Control power
management?OA firmware versionc-Class enclosure model
Yes2.60c3000
Yes2.60c7000
3.3 DL series servers
Table 3-3 lists the HP ProLiant DL series servers that are supported for use with Insight Control
for Linux.
The DL100 G5 series were qualified with the LO100i MP firmware version 3.11; the DL100 G6
series were qualified with MP firmware version 4.03. Table 3-3 lists the System ROM (BIOS)
firmware versions for the DL100 series servers; the text Initial in this column means the minimum
firmware version is the firmware version delivered in the initial release of the server.
The DL300 series and DL500 series servers were qualified with the iLO management processor
firmware version 1.79. Furthermore, the DL300 series and DL500 series servers were qualified
with the latest System ROM (BIOS) firmware version on the HP ProLiant Firmware Maintenance
CD Version 8.60. For more information on the HP ProLiant Firmware Maintenance CD, see
“ProLiant Firmware Maintenance CD” (page 18).
12 Supported servers and enclosures