HP Intelligent Management Center v5.2 iNode Installation Guide (Linux)

10
FAQ
An error message appears when I run a newly installed Linux iNode client, as shown in Figure 11.
What shall I do?
Figure 11 Error message
The language of the Linux operating system is not supported by Linux iNode. This issue does not affect
the authentication function provided by Linux iNode, but the authentication information is displayed in
illegible characters.
Follow these steps to solve the problem:
1. Execute the vi /etc/profile command as root (or administrator in Ubuntu) to open the configuration
file.
Figure 12 Configuration file
2. As shown in Figure 12, add export LANG=en_US in the configuration file.
3. Save and exit the configuration file, and then restart the operating system to bring the
configuration into effect.
How can I install Linux iNode in Linux RedHat ES 6 x86_64?
Linux iNode must operate based on 32-bit libraries. Make sure your Linux operating system has a 32-bit
library. Typically, you can install the 32-bit library for Linux iNode from the Linux installation disk:
1. Copy lib32_install.sh on the iNode installation disk. The file is located in the same path as the
iNode installation program.