HP Intelligent Management Center iNode Installation Guide (Mac OS)

Figure 8 Installing the client
Step10 A r the installation process, you will enter the page as shown in fte Figure 9. Click Restart to restart the
operating system to ensure normal operation of the iNode software.
Figure 9 Finish the installation
Step11 V fy the installation. eri
After installing Mac OS iNode, you can check the status of
AuthenMngService. If this service is enabled,
you have successfully installed iNode on the Mac operating system.
To check the service status, follow these steps:
1. Click the icon on the upper right corner of the desktop, search for the activity monitor, and then
open it, as shown in
Figure 10.