HP Intelligent Management Center Extended API User Guide

Modify SNMP Settings

Modify SNMP settings for a device based on device ID.

Interface URI

/plat/res/device/{id}/updateSnmp

Access Method

HTTP

PUT

Parameters

Path parameter

Device ID.id

Long integer type. Required. No default value.

Message body

<paraType>SNMPv1</paraType>

<roCommunity>public</roCommunity>

<rwCommunity>private</rwCommunity>

</snmpParameter>

</device>

</device>

Element description

device sub-elements

SNMP parameters.snmpParameter

Element type. See the following description.

SNMP template ID.snmpTmplId

Integer type. If both snmpTmplId and snmpParameter exist, snmpParameter is preferred, and

snmpTmplId is omitted.

snmpParameter sub-elements

Parameter type. Valid values: SNMPv1, SNMPv2c, SNMPv3 No-Priv No-Auth, SNMPv3 No-Priv

Auth-Md5, SNMPv3 No-Priv Auth-Sha, SNMPv3 Priv-Des Auth-Md5, SNMPv3 Priv-Des Auth-Sha,

paraType

SNMPv3 Priv-Aes128 Auth-Md5, SNMPv3 Priv-Aes128 Auth-Sha, SNMPv3 Priv-Aes192 Auth-Md5,

SNMPv3 Priv-Aes192 Auth-Sha, SNMPv3 Priv-Aes256 Auth-Md5, and SNMPv3 Priv-Aes256 Auth-Sha.

String type. Optional. If the element does not exist, the value is not changed. If the element exists,

the value cannot be null.

Read-only community name.roCommunity

String type. Optional. If the element does not exist, the value is not changed. If the element exists,

the value cannot be null.

96 Network Resource Management