HP Imaging and Printing Security Center 2.0 - Instant-On Security

5
A device Secure at Install experience is the result of this two-step process. After the
Secure at Install process is complete, Instant-On continues with the Stay Secure process
via the DAA announcements that occur for device cold resets, IP address changes and other
device specific conditions. The Stay Secure process ensures the device is remediated in
accordance with the last security policy applied. With HP IPSC, only the settings found to
be out of compliance with the established security policy are targeted for remediation.
To quickly identify DAA functionality presence on a specific device, print a configuration
page. A configuration page example of DAA presence is provided in Figure 3 below. Or,
browse to the device’s Embedded Web Server (EWS) Networking page to verify DAA
presence. Figure 4 provides this example.
FIGURE 3
FIGURE 4