HP Imaging and Printing Security Center 2.0 - Instant-On Security

6
Figure 5 provides another example of how to determine if the device supports the DAA.
Beginning with version 10.2 Service Release 7, HP Web Jetadmin provides fleet
configuration of the Device Announcement Agent. You can set up a device layout in HP
Web Jetadmin to include the Device Announcement Agent column. DAA presence is
indicated by an Enabled, Disabled or Not Supported status in this column.
FIGURE 5
The device DAA functionality is enabled by default, but can be manually disabled using the
control panel, HP Embedded Web Server or HP Web Jetadmin. See the control panel
example in Figure 6. HP IPSC can also disable the DAA, if set to remediate in a policy.
FIGURE 6