Successful System Cloning using Ignite-UX

later the icod_stat command may generate a message indicating that the compliance state of

the system requires an upgrade codeword. You can obtain the upgrade codeword from the

iCAP portal; for more information, refer to the HP Instant Capacity User's Guide for your version

of iCAP.

• It is safe to install iCAP version B.06.00 or later on any cell-based system. Any HP-UX OE media

that supplies iCAP version C.06.00 or later requires that the iCAP software is installed on all cell-

based systems even if non-iCAP. Failure to install the software may cause components of other

software products used to manage partitions (vPars and nPars) to cease functioning. This is

applicable to both iCAP and non-iCAP cell-based systems.

• From iCAP version B.8.00 and onwards, you can install iCAP onto any system since it can be a

GiCAP group manager. The one exception is N, V, and L series iCAP systems. You must not

upgrade the iCAP software past version 6.x on those systems.

Summary

If you ensure that Ignite-UX is kept up-to-date on your system and carefully think about the software

you are attempting to install, you are unlikely to encounter a lot of the problems described herein.

In general, if you find yourself asking the question, “What Ignite-UX version should I use?” please

consider using the very latest version to ensure that all features, hardware, and software releases

are included. To familiarize yourself with the contents of the Ignite-UX product, you can review the

release notes for the latest release at:

Review the enhancements and updates delivered with each version of Ignite-UX you are using up to

the latest version, and then select the most appropriate version for your needs.

http://www.docs.hp.com/en/IUX/infolib.html

The Ignite-UX product can be obtained from the HP-UX release media or downloaded from the

Ignite-UX product website at:

http://www.docs.hp.com/en/IUX/download.html