Ignite-UX Release Notes HP-UX 11iv1, HP-UX 11iv2, and HP-UX 11iv3 (5900-3360, November 2013)

type 1 - default HP "month" "day" tape volume name; and type 2 - the user specified
6-character name that does not start with HP.
Notes related to known problems with this release:
◦ A new known issue regarding Integrity i2 system firmware that has no impact on Ignite-UX
operation has been added to this document: 4.5 EFI Firmware Networking Utilities and
Integrity i2 Servers.
Version C.7.10.474 (May 2010 - Web release only)
The C.7.10.474 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Table 13 HP-UX release/architecture combinations supported on Ignite-UX version C.7.10.474
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
This version can be installed on any server running one of the above releases of HP-UX when
downloaded from the Web.
Ignite-UX version C.7.10.474 contains the following new features:
Fixes for the following Change Requests:
• QXCR1001006794. A problem with 11.23 HP Integrity client recovery involving SAS disks
and their remapping which would stop the process has been resolved. For network recovery,
an update to this version is sufficient. For tape recovery, either the tape must be recreated
using this version or a boot media of this version must be created, and then the process is
switched to the old tape.
Notes related to known problems with this release:
There are no new known problems.
Version C.7.10.472 (March 2010)
The C.7.10.472 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Table 14 HP-UX release/architecture combinations supported on Ignite-UX version C.7.10.472
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
This version can be installed on any server running one of the above releases of HP-UX when
downloaded from the Web.
Ignite-UX version C.7.10.472 contains the following new features:
• Ignite-UX now supports boot, dump, swap and data volumes for LVM volume group version
2.2 for HP-UX 11iv3, as well as the earlier version 1.0. This new LVM volume group version
supports higher limits on parameters such as "Max VG Size", "Max VGs"and "Max LVs" as
compared to LVM volume group version 1.0. More information on LVM volume group version
2.2 can be found at: http://www.hp.com/go/hpux-core-docs .
On this page, select “HP-UX 11i Volume Management (LVM/VxVM) Software”.
22 Ignite-UX releases