Ignite-UX Release Notes HP-UX 11iv1, HP-UX 11iv2, and HP-UX 11iv3 (5900-3360, November 2013)

Notes related to known problems with this release:
There are no new known problems.
The following limitation is applicable for the current release:
Starting with March 2011 update of HP-UX 11i v3, Ignite-UX version C.7.12 or above supports
installation of 5.1 SP1 software and configuration of the disks for use.
Though 5.1 VxVM creates disk group with a disk group version of 160 by default (outside Ignite-UX
Environment), Ignite-UX only supports the creation of disk group version 140 during the installation
using 5.1 VxVM software. VxVM disk groups with a disk group version of 160 cannot be restored
using Ignite-UX version C.7.12 or above.
Archive creation of those volumes having disk group version of 160 is not supported by Ignite-UX
and the archive creation process does not display any error/warning indicating that the restore
operation will fail.
Future versions of Ignite-UX may support archive/restore operations of VxVM disk groups with a
disk group version of 160 or above. For the latest information on the Ignite-UX product, see the
latest version of the Ignite-UX Release Notes.
Version C.7.12.519 (March 2011)
The C.7.12.519 release of Ignite-UX supports the following HP-UX release/architecture combinations:
Table 12 HP-UX release/architecture combinations supported on Ignite-UX version C.7.12.519
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
After downloading from the Web, this version can be installed on any server running one of the
above HP-UX releases.
Ignite-UX version C.7.12.519 contains the following new features:
The following manual page entries are either added or updated:
• bootsys(1M)
• ignite-ui(1M)
• instl_adm(1M)
• make_ipf_tape(1M)
• make_medialif(1M)
• make_net_recovery(1M)
• make_sys_image(1M)
Fixes for the following Change Requests:
• QXCR1000893208. Ignite-UX is now capable of installing recovery images where APA was
being used for HP-UX B.11.31. See "Verifying Recovery Image Results" under Section 15 in
the Ignite- UX Admin Guide for information regarding limitations of APA support.
• QXCR1000926125. list_expander will now include symbolic links even if there are NFS
mounts under it. This had affected the make_*_recovery commands.
• QXCR1000965183. Necessary changes were made to enable logging of warnings in the
recovery.log by list_expander.
Version C.7.12.519 (March 2011) 17