Ignite-UX Release Notes (769572-001, March 2014)
Table Of Contents
- Ignite-UX Release Notes
- Contents
- HP secure development lifecycle
- 1 Related information
- 2 Announcements
- 3 Ignite-UX releases
- Version C.7.18.63 (March 2014 AR and Web release)
- Version C.7.17.391 (November 2013 - web release only)
- Version C.7.17.361 (October 2013 – This version is suspended and unsupported.)
- Version C.7.16.283 (March 2013)
- Version C.7.15.254 (September 2012)
- Version C.7.14.274 (March 2012 - web release only)
- Version C.7.14.264 (March 2012)
- Version C.7.13.259 (September 2011 - web release only)
- 4 General features
- 5 Known issues
- 6 Known problems and workarounds
- Required patches
- General issues
- Networking issues
- User interface issues
- Issues when installing from archives
- Common problems loading patches
- make_[tape|net]_recovery issues
- Log file issues
- Security issues
- Cluster File System(CFS) issue
- September 2004 or earlier Itanium based VxVM golden image load failure
- Memory File System(MemFS) issue
- Encrypted Volume and File System(EVFS) issue
- Disk space issues using VxVM & hard drive models ST318203[FL]C
- VxVM used for OS content with non-VxVM root volume install
- Support issue for B.11.11 installs
- 7 Compatibility and installation requirements
- 8 Native language support
- 9 Documentation feedback
2 Announcements
Ignite-UX is a product supplied with HP-UX to perform initial configuration and software installation
of HP-UX systems.
The English version of this document posted on the web may contain more current information than
the version included in the product. For the most current information, go to:
http://www.hp.com/go/ignite-ux
This version of Ignite-UX is able to install the following HP-UX release/architecture combinations:
Table 2 HP-UX release/architecture
HP Integrity systemsHP 9000 systemsHP-UX release
NoYesB.11.11
YesYesB.11.23
YesYesB.11.31
For a full description of the differences between the "A", "B" and "C" versions of this product, see
“Release numbering scheme” (page 8).
Ignite-UX is available via Hewlett-Packard's software website at:
http://www.software.hp.com.
Ignite-UX is available via Hewlett-Packard's software website at:
http://www.hp.com/go/ignite-ux.
This site is kept up to date with the latest version of Ignite-UX, along with articles and other
documentation of interest. Check this site for new versions, FAQs, and other information about
Ignite-UX.
There are a few HP-UX patches that must be installed for proper operation of Ignite-UX. See
“Required patches” (page 22).
Release numbering scheme
The Ignite-UX code base is common for much of the content of these releases so the features are
similar. One of the important differences between Ignite-UX releases is the set of HP-UX releases
supported.
The format is:
{A|B|C}.major-rev.minor-rev.ticker
{A|B|C} => Major version identifier; rarely changes except when a major Ignite-UX design change
occurs.
=> A and B versions of Ignite-UX are no longer supported.
=> C: supports HP-UX B.11.11, B.11.23 and B.11.31 Ignite-UX servers installing
HP-UX B.11.11, B.11.23 and B.11.31 targets. HP-UX 11.31 server and target
support is not available prior to the C.7.0 version of Ignite-UX.
major-rev => Major software release number; rarely changes except when a major change occurs
(for example, adding support for a new operating system)
minor-rev => Changes at each release
ticker => Changes each time we rebuild the product
8 Announcements