Ignite-UX Release Notes (769572-001, March 2014)
Table Of Contents
- Ignite-UX Release Notes
- Contents
- HP secure development lifecycle
- 1 Related information
- 2 Announcements
- 3 Ignite-UX releases
- Version C.7.18.63 (March 2014 AR and Web release)
- Version C.7.17.391 (November 2013 - web release only)
- Version C.7.17.361 (October 2013 – This version is suspended and unsupported.)
- Version C.7.16.283 (March 2013)
- Version C.7.15.254 (September 2012)
- Version C.7.14.274 (March 2012 - web release only)
- Version C.7.14.264 (March 2012)
- Version C.7.13.259 (September 2011 - web release only)
- 4 General features
- 5 Known issues
- 6 Known problems and workarounds
- Required patches
- General issues
- Networking issues
- User interface issues
- Issues when installing from archives
- Common problems loading patches
- make_[tape|net]_recovery issues
- Log file issues
- Security issues
- Cluster File System(CFS) issue
- September 2004 or earlier Itanium based VxVM golden image load failure
- Memory File System(MemFS) issue
- Encrypted Volume and File System(EVFS) issue
- Disk space issues using VxVM & hard drive models ST318203[FL]C
- VxVM used for OS content with non-VxVM root volume install
- Support issue for B.11.11 installs
- 7 Compatibility and installation requirements
- 8 Native language support
- 9 Documentation feedback
Tape device support
Starting with version C.6.8 recovery and custom boot tapes created with Ignite-UX may be used
for direct tape boot with Hewlett-Packard Itanium-based systems.
In order to use direct boot from tape, you will need an Itanium-based system or firmware upgrade
which supports direct tape boot. Direct tape boot may not be supported with some I/O interfaces.
Some Itanium-based systems may never have firmware support for direct tape boot.
Support for the two-step media recovery process continues. Use of the two-step media recovery
process requires use of HP-UX installation or custom boot media containing matching Ignite-UX
version boot content. For more information on this process, see the section on tape recovery with
no tape boot support in the Ignite-UX Administration Guide at: http://www.hp.com/go/ignite-ux.
Tape device support 33