Ignite-UX Release Notes (769572-001, March 2014)
Table Of Contents
- Ignite-UX Release Notes
- Contents
- HP secure development lifecycle
- 1 Related information
- 2 Announcements
- 3 Ignite-UX releases
- Version C.7.18.63 (March 2014 AR and Web release)
- Version C.7.17.391 (November 2013 - web release only)
- Version C.7.17.361 (October 2013 – This version is suspended and unsupported.)
- Version C.7.16.283 (March 2013)
- Version C.7.15.254 (September 2012)
- Version C.7.14.274 (March 2012 - web release only)
- Version C.7.14.264 (March 2012)
- Version C.7.13.259 (September 2011 - web release only)
- 4 General features
- 5 Known issues
- 6 Known problems and workarounds
- Required patches
- General issues
- Networking issues
- User interface issues
- Issues when installing from archives
- Common problems loading patches
- make_[tape|net]_recovery issues
- Log file issues
- Security issues
- Cluster File System(CFS) issue
- September 2004 or earlier Itanium based VxVM golden image load failure
- Memory File System(MemFS) issue
- Encrypted Volume and File System(EVFS) issue
- Disk space issues using VxVM & hard drive models ST318203[FL]C
- VxVM used for OS content with non-VxVM root volume install
- Support issue for B.11.11 installs
- 7 Compatibility and installation requirements
- 8 Native language support
- 9 Documentation feedback
7 Compatibility and installation requirements
Software requirements
Ignite-UX C.* can be installed on any HP-UX system running B.11.11, B.11.23, or B.11.31 when
downloaded from the web. If installed from Application Media, it can only be installed on the
same release of HP-UX that the Application Media is targeted at (i.e. Ignite-UX from the B.11.23
Application Media can only be installed on B.11.23).
Hardware support matrix
For current information on both supported and unsupported hardware for B.11.23, see the HP-UX
11i v2 Installation and Update Guide at: http://www.hp.com/go/hpux-core-docs. On this page,
select HP-UX 11i v2.
VxVM and VxFS support
This section describes which versions of VxVM and VxFS are supported by Ignite-UX versions for
each HP-UX release. Ignite-UX provides install and recovery support for the VxVM and VxFS versions
listed in this table unless otherwise noted.
Table 15 Supported VxVM and VxFS versions
VxVM/VxFS Versions SupportedIgnite-UX VersionClient OS
5.1 SP1, 5.0, 4.1C.7.12 and greaterB.11.31
5.0, 4.1C.7.3 and greaterB.11.31
4.1C.7.0 - C.7.2B.11.31
Table 16 Supported VxVM and VxFS versions
VxVM/VxFS Versions SupportedIgnite-UX VersionClient OS
5.0**, 4.1, 3.5C.6.9 and greaterB.11.23
4.1, 3.5C.6.4 - C.6.8B.11.23
3.5B.5.0 - C.6.3B.11.23
NOTE: Cold install of VxVM 5.0 is not supported.
Table 17 Supported VxVM and VxFS versions
VxVM/VxFS Versions SupportedIgnite-UX VersionClient OS
3.5B.5.0 and greaterB.11.11
LVM 2.0 support
Ignite-UX does not currently support the installation and recovery/restore of LVM volume groups
having the volume group version 2.0 and 2.1. If a system to be recovered has a volume having
volume group version 2.0/2.1, such volumes will be imported during the install of recovery images
provided they are not included in the archive using the option "-x inc_entire=<vgname>" or
by some other means.
Alternatively, starting HP-UX 11i v3 March 2010 update release,LVM supports volume group
version 2.2, and Ignite-UX supports installation and recovery/restore of LVM volume groups having
volume group version 2.2. Users can migrate 2.0/2.1 volumes (which are created outside Ignite-UX
install environment) to volume group version 2.2 using the LVM's volume group migration tool
(vgversion(1M) command) prior to the archive creation.
32 Compatibility and installation requirements